E-Mail Id :
info@accuratevalves.inCall Now :
+91-79840 26973
E-Mail Id :
info@accuratevalves.in
Call Now :
+91-79840 26973
We are one of the best leading manufacturers of Pneumatic valves in Ahmedabad, India. Our industry created pneumatic and other diversity of valves is highly demanded in the middle of the market as they all are planned according to the higher functionality better presentation. The technological sequence made in raw-material, diagram and construction processes has added upgrade the normal and variety of pneumatic machinery and there by contributed to their extensively increase use in automation.
One essential component that should not be unnoticed is pneumatic valves . Not only do they control the way of air flow in serious operations in the system, but they are also a probable source of issues, particularly if they are not of good excellence.
These valves are operated by Pneumatic Actuators, power or Hydraulics. lined Pneumatic Valves are very common in use because of their simplicity and low preservation as they just need an air compressor to function them.
SAND Casting WCB 2 & 3 Way Diaphragm Operated Modulating Type Control Valve Multi Action (Direct / Reverse Acting) 150#
| Body | WCB |
| Size | 1/2″ to 4″ |
| Diaphragm | Single Acting |
| Seals | Soft Seated |
| Leakage | ANSI B 16.104 Class IV |
| Temprature | Upto 220°C |
| Pressure | ASME B 16.5 |
| Ends | 150# |
This valve is also called the Y type Control Valve or the Y type Pneumatic Control Valve because of its body shape. It is shaped like a Y angled and hence it is also known as an Angle Type Control Valve.
| Body | Aluminium / S.S.304 |
| Actuator Type | Double Acting / Single Acting |
| Air Connection | 1/4″ BSP (NPT On Request) |
| Operating Pressure | 4.5 to 7 BAR (1/2″to 2″), 5 to 7 Bar (2.1/2″ to 4″) |
| Operating Cycles | 350 to 650 Cycles / Hr. |
| Size Range | 1/2″ to 4″ |
| Body | CF8 / CF8M / CF3M |
| Bonnet | CF8 / CF8M / CF3M |
| Pressure | up to 10 Bar |
| Temperature | up to 220°C |
| Leakage | As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight |
| End Connection | Screwed End / Flanged End |
We make Our Pneumatic Ball Valve in ½” to 14” with three end connection Screwed End, Flanged End, and Socket Weld so complete solution for Industry and Users. Aira Euro Automation design and manufacture a range of high integrity instrumentation Pneumatic Ball valves for worldwide applications, yes we supply worldwide as per customer requirement and their drawing.
| Design | 3 Piece Design Ball Valve (Fire Safe Design Available ) |
| Body | WCB / CF8 / CF8M / CF3M |
| Size | ½” to 14” |
| Ball | CF8 / CF8M / CF3M |
| Seat | PTFE / CFT / GFT / PEEK / TFM |
| Temprature | up to 180° C |
| Pressure | Up to 10 BAR |
| End Connection | Screwed End / Socket Weld / Triclover / Flanged End Class 150#, 300# |
Our model can sustain -50°C to 500°C temperature and we are ready to make up to 800°C temperature valve on a customer request. It is available in two end connections either screwed Or flanged end connection with 150#, and we can make 300# & 600# class on request.
| Design | 3 Piece Fire Safe & Floting Design Ball Valve |
| Body | WCB / CF8 / CF8M / CF3M |
| Size | ½” to 4” (up to 10” On Request) |
| Ball | CF8 / CF8M |
| Seat | Metal to Metal |
| Temprature | -50° C to 500° C (-50° C to 800° C On Request) |
| Pressure | Up to 10 BAR |
| End Connection | Screwed End / Flanged End to ASME B 16.5 Class 150 (300 Class & 600 Class On Request) |
Over 10 years experience and knowledge international standards, technologicaly changes and industrial.
Copyright All Rights Reserved © 2021. Accurate Valves || Powerd by - A1 Infosoft
